• 1.Wine, Sprit, Oil, Ooffee, Fruit juice, Brandy, Vinegar.
  • 2.ISO 9001, ISO 14001, HACCP
  • 3.Asia, North America, Europe, Australia
Home > News > Content

Do You Need To Clean And Sterilize The Aluminum Cover?

Jun 03, 2019

Many people think that the aluminum cover does not directly contact the food and medicine through the rubber plug when it is used, and the aluminum cover production environment itself is high, so no additional cleaning is needed during the processing because the aluminum cover is easily deformed during the cleaning process. , causing additional losses and expenses. When the aluminum cover is used in practice, for example, when the hospital is in use, the medical staff will separately disinfect the aluminum cover and the needle part, so it is not necessary to disinfect during production. Do you support this theory?

Reminder: The main purpose of aluminum cover cleaning is to wash off the lubricant added during the production process, because the presence of lubricant may cause pollution to the product and affect the stability of the rubber plug.

Aluminum lid sterilization is commonly used in three methods: dry heat sterilization, moist heat sterilization, and ozone sterilization. Dry heat will cause discoloration of the aluminum cover, and it will leave water marks when it is hot and humid. Ozone disinfection does not seem to have a direct impact on the appearance performance of the aluminum cover, but it is affected by the temperature and humidity of the sterilization effect, and the reliability is not good. What kind of sterilization method do you think is better?

Aluminum lid sterilization should be carried out in accordance with the actual situation of the company. There are advantages and disadvantages in each of the three methods. If there is no perfect method, then it will be better according to the actual situation of the company.

All in all, the aluminum cover still needs to be cleaned. Is it necessary to sterilize? It still depends on the environment of the rolling cover to judge and needs to be compatible with the production environment. Moreover, the aluminum cover is contaminated with oil and aluminum chips during the production process, and is not washed away, which is liable to damage the capping machine.

Our team has 15 years experience in this industry, and our products were exported to more than 30 countries in the world. The misson of our team is to be a professional solution provider with a systematically resources and related know-how which comes from our long-term practice.